Projectiondesign F35 Betriebsanweisung PDF herunterladen (Seite 40)

english

40User’s Guide – Maintenance

9.2 Lamp replacement

The LAMP indicators on the keypad will turn red when lamp life expires.

Change the lamp when lifetime expires. Always replace lamp with the same type and rating.

USE ORIGINAL LAMPS ONLY.

The lamp includes an electronic lamp timer that is tracking the life time of the lamp.

Allow lamp to cool down before changing. One lamp may be changed while the other lamp is

operating (hot-swap).

Release the screw (LAMP 1) or (LAMP 2) depending on which lamp that needs to be re-

placed.

WARNING! Be careful not to touch the protective glass when replacing the

lamp house, this may cause the protective glass to overheat and break

while in use.

WARNING! Be extremely careful when removing the lamp module. In the

unlikely event that the bulb ruptures, small glass fragments may be

generated. The lamp module is designed to contain these fragments, but

use caution when removing the lamp module.

A Open the lamp lid(s).

B Turn the three locking screws a quarter turn anti-clockwise.

C Pull the lamp out.

D Replace with a new lamp in reverse order.

E Insert a new lamp. Observe the guide pins.

F Turn the tree locking screws a quarter turn clockwise.

G Close the lamp lid.

H Turn the locking screw clockwise.

1 2 ... 35 36 37 38 39 40 41 42

Keine Kommentare

Projectiondesign F35 Betriebsanweisung Seite 40