Projectiondesign F35 Betriebsanweisung PDF herunterladen (Seite 35)

english

www.projectiondesign.com

7.2.3 RealColor™ operating modes

Before any color correction is applied to the image, the feature must be enabled. Go to menu

entry PICTURE > REALCOLOR > COLOR CORRECTION to enable RealColor™.

RealColor™ can operate in 3 modes:

• Colortemperature/whitepointcorrectiononly.

• Red,Green,Blue,Whitecorrection.InthismodeoptimalcolorcoordinatesforCyan,

Magenta and Yellow will be computed automatically.

• Red,Green,Blue,Cyan,Magenta,Yellow,White.Inthismodecolorpointsandintensity

for each color can be manipulated separately.

To change the RealColor™ mode, please go the menu entry PICTURE > REALCOLOR >

DESIRED VALUES > DESIRED COORDS MODE.

7.2.4 Setting a white point or color temperature

After enabling RealColor™, set the color temperature in the menu entry PICTURE > REAL-

COLOR > COLOR TEMPERATURE. Values between 3200K and 9300K can be selected.

These color temperatures are tracking the “black body curve”- the black curved line in the

center of CIE Chart in Figure 7-7. The default is the D65 illuminant at 6500K.

Figure 7-7. CIE Chart with the black body

The white point can also be set to a custom value deﬁned by an x, y coordinate not linked to

the black body. Go to menu entry PICTURE > REALCOLOR > X-COORDINATE and PIC-

TURE > REALCOLOR > Y-COORDINATE to change the white point.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Keine Kommentare

Projectiondesign F35 Betriebsanweisung Seite 35